Sinn, the German manufacturer of all things tool watch, has announced an update to their T1/T2 family of titanium dive watches. Now available with deep blue dials, the new Sinn Watches U1 Replica T1 B and T2 B models remain largely unchanged from the T1 and T2 that Sinn launched at Baselworld in 2013 – translating Sinn’s U-series dive watches into another thoroughly dive-ready design featuring a titanium case.
With its warm earthy tone, titanium is a great match for a blue dial, and the Sinn T1 B and T2 B look fantastic. As it’s been a couple years since we went hands-on with these titanium mission timers, I figure a quick recap would be helpful. Without a strap, the Sinn T1 B (aka the Sinn EZM 14) weighs in at 71g, with a case that is 45mm wide and 12.5mm thick, with 22mm lugs. The smaller Sinn T2 B (Sinn EZM 15) is 41mm wide, 13.3mm thick, with 20mm lugs, and weighs 59g without its strap. Being dive watches, the Sinn T1 B is water resistant to 1000m, and the smaller Sinn T2 B is resistant to an impressive 2000m (6562 ft or 1.24 miles).
The crown and pushers are both screw down and large enough to be simple to use and not overly fiddly. Despite its large size, the Sinn Watches Discount Replica wears comfortably on the wrist. I don’t see it fitting in quite well with proper office wear however with jeans and a t-shirt or if you happen to get a non-desk diving occupation, the Sinn 103 must fit right in and not be overly conspicuous. The watch can be found on a leather or rubber strap, or Sinn’s solidly constructed H-link bracelet. While I’m personally a fan of Sinn’s nice link bracelet, I believe that the H-link variant is much better suited here given the bigger instance size.As a pilot’s watch, the dial on the Sinn 103 St Sa E is matte black with contrasting text and indices to optimize legibility. The hour markers are painted and Arabic on the dial with the faux-patina lume that’s a signature to this variant. The syringe hands are also full of the same lume and takes the classic feel of the whole watch a notch up. The faux patina keeps the high contrast with the dial required for the legibility that pilot watches are famous for.The sub-dial in 12:00 suggests chronograph moments, the one at 6:00 that the chronograph hours, and the one at 9:00 is for continuous seconds. At 3:00, we have the day-date index, which happily is black with white text on it. This keeps legibility when enabling it to blend nicely with all the dial. A white with black text version could seem bad, to put it clearly. The date wheel at the opinion we got our hands on was in German, which can be very common for Sinn. But, I do think English date wheels can be found, especially if purchased through their American distributor, WatchBuys.I believe the use of faux-patina lume might be a bit too much for some collectors — though I personally dig it. If you do happen to be in the camp that would like it without, worry not, for Sinn has other variations of this Sinn 103. Quibbling over lume color aside, it is hard to argue that this can be a fine tool watch really. The only two lost Sinn technologies would be the tegimented steel and argon humidity index for its water-proofing system, but people who would add additional cost to production, not to mention that the tegimented steel’s darkish grey won’t match this watch nicely.
Both versions use a Soprod A10-2 Swiss automatic movement that beats at 4Hz, uses 25 jewels and is anti-magnetic to DIN 8309 and anti-shock to DIN 8308. The Soprod is a solid and reliable alternative to ETA’s 2892 and a fitting choice given Sinn’s price point.
Size and specs aside, Sinn Watches 556 Review Replica approaches the design and construction of all of their watches from a decidedly pro-tool position. To that end, the Sinn T1 B and Sinn T2 B are legitimate dive watches and have been manufactured to be as tough as possible. The cases are bead-blasted and the bezels use Sinn’s TEGIMENT treatment for additional scratch resistance. The bezel also features Sinn’s captive design, meaning it must be depressed before it can be turned, preventing accidental rotation.
As is the case with most of Sinn’s watches, the T1 B and T2 B use their Ar-Dehumidifying technology to prevent fogging, even under extreme conditions, such as rapid transitions from hot to cold (the watches are rated for use between -45C to +80C). With solid case backs and anti-reflective sapphire crystals, both the Sinn Watches Cost Replica T1 B and Sinn T2 B are low pressure resistant and backed by a three year warranty.
In commitment to the possibility that someone might use the Sinn Watches Hamburg Replica T1 B or Sinn T2 B in a professional diving scenario, both models are dive certified by DNV GL and meet the requirements for DIN 8306 and DIN 8310 as well as EN 250 and EN 14143, the European standards for dive equipment. To save you a probable Google search, DNV GL is a company that certifies compliance and standards in a number of industries, including diving/maritime applications. Finally, just like the original T1 and T2 models, the Sinn T1 B and Sinn T2 B feature distinct coloring for the luminous paint on the minute hand and bezel triangle, allowing for increased legibility when reading the elapsed time in low light environments (seen above, this would be very handy on a night dive).
Sinn is constantly upping their game when it comes to modern tool watches and they arguably set the bar for the entire concept. From their mission timer chronographs to their TESTAF pilot’s watches and dive watches like the T1 and T2, they make wonderfully over-engineered watches that capture the base appeal of sport watches – an appeal that spans from desk divers to fighter pilots and everyone in between.
While pricing and availability will depend on where you live, for those in North America, Sinn’s exclusive US is Watchbuys.com, and the Sinn T1 B and Sinn T2 B will cost the same as their black-dialed counterparts. The 45mm T1 B will cost $3240 USD on your choice of a titanium bracelet or a blue silicone strap with a fold-over extension clasp. The 41mm Sinn T2 B is listed for $3060 USD and can be had with a titanium bracelet or a blue silicon strap with a butterfly clasp (non-extending). Sitting closely in terms of price, you just have to pick the size that suits your taste and decide between the titanium bracelet or the matching silicone strap (which just looks amazing). On either mount, both the Sinn T1 B and Sinn T2 B are nothing short of catnip for the dive watch crowd, and I’d certainly love to take a Sinn T2 B along for a couple of dives. sinn.de